General Safety Archives

Solo 330 Aerosol Smoke Dispenser

Fundamental to functional smoke checking for many professionals around the world the Solo 330 contains the test aerosol and ensures that it is applied correctly and contained only where required. Used with the access poles it enables safe testing at heights but is equally valued at low level.

Lightweight and simple to use
Universal design suits widest range of detectors (up to 100mm / 4″ in diameter)
Spring-loaded solution for suspended ceilings
Transparent test cup for clear view of detector LED
Swing frame for use at / from angles
Outstanding quality backed by lifetime warranty*
Detector manufacturer approved
Solo 332 suitable for detectors up to 177mm / 7″ in diameter

Solo 365 Smoke Detector Tester

Solo 365 generates smoke on-demand via non-pressurised smoke cartridges – it’s lighter to use, quicker to test and suitable for more applications.

On-demand smoke – faster testing, less wastage, eliminates risk of contamination
15% lighter than Solo 330 – supports easy movement around site
Slim-line design – allows easy access to hard-to-access detectors
Auto LED torch – for simple testing in dark environments
Clearing mode – prevents re-alarms
Non-pressurised cartridge – easy storage & transportation
Detector manufacturer approved

SOLO 423 / 424 Heat Detector Tester (110 -> 240V)

Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals’ choice where cables and leads are acceptable. Unconstrained by energy availability they provide the quickest of test times and are, perhaps, most suitable for the highest temperature detectors.

Suits fixed temperature, rate-of-rise and combination detectors up to 194°F / 90°C
Quickest activation times
Lightweight and simple to use
Universal design suits widest range of detectors
Designed for use at height, at angles and low level
Supplied with 5m / 16ft cable (additional 5m / 16ft cable available

SOLO 461 Cordless Heat Detector Tester (Battery Powered)

Using the unique IR activation and Cross Air Technology, the Solo 460 heat generation process takes place only when the detector under test is within the cup with hot air blown horizontally in a focussed beam directly toward the sensor for optimum energy use and results. Interchangeable NiMH battery batons and a fast battery recharger enable testing all day with a cable free professional device.

Detector manufacturer endorsed
No cables, trailing leads or hanging wires
Battery powered (Kits include 1 or 2 higher capacity (3000mAh) Battery Batons, and UL-listed fast charger with mains and in-vehicle power leads)
Suits fixed temperature, rate-of-rise and combination detectors up to 194°F / 90°C
Lightweight and simple to use
Universal design suits widest range of detectors
Transparent test cup for clear view of detector LED
Designed for use at height, angles or low level

Solo kits are being updated to use the NEW higher-capacity battery batons (Solo770) to give longer, un-interrupted testing which increases on-site productivity. The fast charger has also been updated (Solo727) and continues to fully charge a Solo770 battery baton in 60 to 90 minutes (when completely discharged).

Solo C3 Carbon Monoxide Detector Tester

Detector manufacturer endorsed
Genuine and non-flammable CO stimulus
Controlled delivery
Designed for use with Solo 330 / 332 dispensers

Note: certain CO life safety detectors (as opposed to fire detectors with CO sensors within them) require a low concentration of CO sustained over a long period of time. Solo C3 and Solo 330 / 332 are unlikely in isolation to prove suitable for testing these detectors.

Solo Smoke Aerosols

Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.

All Solo smoke aerosols are:

Detector manufacturer approved
Designed for use with the Solo 330/332 dispensers
Non-toxic
Silicone free

Aerosols product range:

Solo A3 (Non-flammable) Smoke Detector Tester – UL & ULC Listed

Solo A5 (Flammable) Smoke Detector Tester – UL & ULC Listed

Solo A10 (Non-flammable, HFC-Free) Smoke Detector Tester

Spreader SP 50 BS SMART-FORCE

Compact battery spreader of the latest generation with revolutionary smart features

Numerous innovative and smart additional functions
Huge spreading path for all applications
Tips with interior and exterior spikes
Wrap-around handle for easier handling and reaching around
18V MILWAUKEE M18^TM HIGH-OUTPUT^TM battery technology (battery not included)

SR203 VHF Handheld Survival Radio

VHF GMDSS Radio
Model Number: SR203 / Part Number 2827

The all ACR SR203 GMDSS VHF Handheld Survival Radio meets all the requirements of the IMO for carriage on SOLAS vessels. Built tough for all marine applications and easy to use in an emergency situation, the SR203 is the ideal choice for mandatory and voluntary carriage. The SR203 handheld VHF radio boasts exceptional battery life of over 16 hours.

FCC & MED Approved

Standard power unit E 70 W-SAH 20

High-performance electrical power unit

high operation speed due to the new high performance pump
can be operated from either side, with turbo function or simultaneous operation of two devices (Turbo-Speed)
with twin or COAX hoses, available in different lengths

T-ISS ATEX Transceiver

The T-ISS ATEX Transceiver VHF radio is a state of the art communication system. It complies with the latest SOLAS and IMO regulations, it’s approved according to regulations with T4 grade IECEx. The sturdy T-ISS ATEX Transceiver is intrinsically safe and explosion proof, – specially designed to meet the high standards of fire-fighting teams on board of your vessel.

T-ISS Hydrostatic Release Unit

The T-ISS SeaMate Ve-1 hydrostatic release unit is designed to operate in all conditions, from extreme heat to the polar environment. In the exceptional situation your vessel sinks, the T-ISS SeaMate Ve-1 will automatically release your life rafts and EPIRB’s.

The innovative design increased the reliability, that’s why the T-ISS SeaMate Ve-1 has an expiry life of 3 years. This means you only replace the HRU every 3 years, instead of 2 years which is common. Besides the cost saving, this also reduces the environmental footprint. The T-ISS SeaMate Ve-1 hydrostatic release also fits on remote release systems, this enables you to release life rafts remotely. An EPIRB model is also available, delivered with the bolt and nut to connect the EPIRB to your vessel.

T-ISS LR/LB35

T-ISS LR/LB35 is a combined automatic release hook which can handle rescue boats and life rafts up to safe working load of 35kN.

It will increase safety, as it has one hook to familiarize with.
It is economical while one hook is sufficient.